ENRetes Stack, also known as a basking stack, er et udtryk, der almindeligvis bruges i krybdyrholdersamfundet, især til øgler som Ackie-skærmen.
The Retes Stack consists of stacked flat wood or stone pieces with spacers in between, skabe sprækker og platforme, som firbenet kan klatre på og sole sig på.
Ved at have flere niveauer, hver med forskellige temperaturer, varben kan vælge det foretrukne solsted, mens den er delvist skjult.
Lagene i stakken er normalt vinklet for at skabe tætte sprækker, som firbenene kan kile ind i, giver en følelse af tryghed.
Målet er at skabe et gradueret temperaturområde og tilbyde firbenene rigelige muligheder for at sole sig.
The specific design and construction of a Retes stack can vary based on individual preferences and the needs of the particular species being kept.
For eksempel, Frank Retes, en respekteret krybdyrentusiast og skaber af konceptet, recommends using plywood sheets instead of stone due to safety concerns.
Stenstabler kan udgøre en risiko for skader eller knusning for krybdyrene. Hvis du vælger sten, try to get flat stone slates and make sure they are secured tightly.
Når du bygger en Retes-stak, det er vigtigt at sikre, at det hviler på gulvet i indhegningen for at forhindre, at øglen graver sig nedenunder og potentielt kommer til skade.
Stakken skal være solid og sikkert samlet for at undgå uheld.
Som Amazon affiliate, vi kan tjene provision på køb af kvalificerede produkter.
Materials Needed
- Plywood sheets: These will form the main structure of your Retes stack. The size and thickness can vary depending on your preference and the size of your reptile.
- Screws or nails: To secure the plywood sheets together.
- Sandpaper: To smooth out any rough edges on the plywood.
- Non-toxic sealant: To protect the wood and make it safe for your reptile.
- Heat lamps: To provide the necessary heat for your reptile. A cluster of at least two halogen flood bulbs is recommended.
- Digital thermometers: To monitor the temperatures in the enclosure. An infrared temperature gun can also be used to measure the basking surface temperature.
Building Your Retes Stack
Step 1: Cutting the Plywood
First, you’ll need to cut your plywood. Start by measuring the size of the enclosure to determine how big each piece needs to be.
Husk, the size and thickness of these pieces can be adjusted based on your personal preference and the size of your reptile.
Once you’ve taken your measurements, use a saw to carefully cut the plywood into rectangular pieces.
Make sure the edges are smooth and there are no splinters that could potentially harm your reptile.
Step 2: Creating Angled Layers
Næste, you’ll want to create angled layers.
This step is all about maximizing the available space in the enclosure and creating tight, cozy spots for your lizard to hide. To do this, angle each plywood layer slightly.
This slight angle will create crevices that your lizard can wedge into, providing them with a sense of security and a place to hide when they want some privacy.
Step 3: Assembling the Stack
Now, it’s time to assemble your stack.
Start from the bottom and work your way up, layering the pieces of plywood on top of each other. Make sure each layer is securely attached to the one below it.
You can use screws or nails for this purpose. Remember to maintain the slight angle you created in the previous step.
Also, make sure the stack is sturdy and securely assembled to avoid any accidents.
You don’t want any pieces falling or shifting unexpectedly.
Step 4: Sealing the Stack
Once your stack is assembled, you’ll want to seal it.
This is especially important if you’re using plywood, as it can absorb moisture and deteriorate over time.
Use a waterproof sealant and apply it evenly over the entire surface of the stack.
Allow it to dry completely before introducing your reptile to its new home.
Step 5: Adding Heat Sources
Lastly, add heat sources to your Retes stack.
Position a heat lamp directly over the stack and another off to the side to create a temperature gradient.
Monitor the temperatures regularly to ensure they are within the safe range for your reptile. Remember to turn off the heat at night.
And there you have it! Your Retes stack is now ready for your reptile to explore and enjoy.
Husk, the key to a successful Retes stack is ensuring it is safe, comfortable, and suitable for your specific reptile’s needs.
Happy building!
Magtara Ledge Hideout Rainforest Series
Magtara Ledge Hideout Rainforest Series fungerer som et gyldigt alternativ til en krybdyrstak, især for mindre firben som skæggede drager. Dets naturalistiske design og sikre interiør giver et tiltalende og sikkert miljø, hvor disse krybdyr kan gemme sig og sole sig komfortabelt.
Læs også: Sådan bygger du en Retes-stabel med sten til skæggede drager
PetsWithScales.com er en informativ hjemmeside om pleje af store øgler. Vi indsamler og giver oplysninger fra forskellige kilder på tværs af nettet om, hvordan man holder og plejer krybdyr som kæledyr. De arter, vi primært beskæftiger os med, er tegus, firben, skinks og gekkoer. Vores mål er at levere information af høj kvalitet for at hjælpe kæledyrsejere med at få det bedre, mere informerede beslutninger om deres dyrs kostvaner, sundhed og liv.